Post Hoc Tests
Dunnett Test Statistical Calculator
Dunnett Test Calculator compare treatments against a control. Use Dunnett Test Calculator to validate groups, control group name, alpha and report method, control_group, group_summaries, mse, df_error, correlation_matrix with method-specific calculations, diagnostics, and interpretation. Use the tabbed test workspace below for data, variables, analysis, visualizations, results, interpretation and reporting.
Quick method summary
The Dunnett Test Statistical Calculator calculates the named method using calculator-specific formulas and reports auditable results, warnings, and interpretation. It uses the calculator-specific formula and reports the intermediate values, final result, warnings, and interpretation.
Post Hoc Tests
Dunnett Test Calculator
Compare treatments against a control. Use Dunnett Test Calculator to validate groups, control group name, alpha and report method, control_group, group_summaries, mse, df_error, correlation_matrix with method-specific calculations, diagnostics, and interpretation.
Calculated result
Calculation method
Dunnett test compares each treatment with the named control using pooled MSE. Two-sided family p-values and the simultaneous critical value come from the correlated multivariate t distribution, evaluated with a fixed reproducible simulation.
Formula
Dunnett test compares each treatment with the named control using pooled MSE. Two-sided family p-values and the simultaneous critical value come from the correlated multivariate t distribution, evaluated with a fixed reproducible simulation.
Assumptions and limits
The comparison procedure must match the omnibus model, variance pattern, sample sizes, and control-group design. Group observations should satisfy the independence or repeated-measure structure of the preceding analysis. Interpret adjusted p-values or simultaneous intervals rather than uncorrected pairwise tests.
Formula review
Formula and independent control cases reviewed 2026-08-02; variable assumptions remain visible inputs.
Dunnett Test Calculator method, assumptions and reporting guideComplete selected-test explanation, assumptions, formula and reporting details
Data Import and Variable Requirements
For the Dunnett Test Statistical Calculator, upload or paste data, review the cleaning report, then select the outcome, group, subject, condition, or matrix roles required by Dunnett Test Calculator. For Dunnett Test Calculator, map Groups, Control group name, Alpha from the cleaned browser-local table; every mapped variable remains editable before calculation, and the active dataset remains available while you work with this selected test and when you return to the Test Finder.
Uploaded files are processed locally in the browser. The cleaning report appears before variable selection, and the selected cleaned columns are mapped to this exact calculator rather than a generic fallback.
Dunnett Test Calculator Workspace Features
- Dedicated Dunnett Test Calculator variable mapping, calculation contract, result explanation, and diagnostics
- Manual inputs plus browser-local XLSX, CSV, or TSV analysis for this exact statistical method
- Auditable cleaning report before method-valid variable dropdowns are created
- Calculator-specific formulas, intermediate quantities, assumptions, warnings, and interpretation
- Responsive method-specific charts generated from the selected cleaned data
- Copy, result CSV, cleaned-data CSV, chart PNG, and result-only print controls
- Protected canonical URL, focused FAQs, and a dedicated selected-test workspace
About the Dunnett Test Calculator
Compare treatments against a control. Use Dunnett Test Calculator to validate groups, control group name, alpha and report method, control_group, group_summaries, mse, df_error, correlation_matrix with method-specific calculations, diagnostics, and interpretation. Post hoc procedures identify which means differ while applying the named family-wise, stepwise, unequal-variance, control-comparison, or decision-theoretic rule.
When to Use the Dunnett Test Calculator
Use the Dunnett Test Statistical Calculator when your research question, variable types, and sampling or experimental design require dunnett test. Do not select it only because the data produce a convenient p-value or familiar output.
How the Dunnett Test Calculator Works
Dunnett test compares each treatment with the named control using pooled MSE. Two-sided family p-values and the simultaneous critical value come from the correlated multivariate t distribution, evaluated with a fixed reproducible simulation.
The calculation runs in the browser. Submitted values are validated for required numeric ranges, data shape, units and method-specific restrictions before results are shown.
Assumptions and Checks
- The comparison procedure must match the omnibus model, variance pattern, sample sizes, and control-group design.
- Group observations should satisfy the independence or repeated-measure structure of the preceding analysis.
- Interpret adjusted p-values or simultaneous intervals rather than uncorrected pairwise tests.
Required Inputs
- Groups (required)
- Control group name (required)
- Alpha (required)
Results Reported
The result workspace shows the final answer and intermediate quantities needed to audit the calculation. Depending on the method, reported values include:
- Method
method - Control Group
control_group - Group Summaries
group_summaries - Mse
mse - Df Error
df_error - Correlation Matrix
correlation_matrix - Simulation Seed
simulation_seed - Simulation Draws
simulation_draws - Monte Carlo Standard Error At 0 05
monte_carlo_standard_error_at_0_05 - Critical Value
critical_value - Alpha
alpha - Comparisons
comparisons - Comparison Count
comparison_count
Dunnett Test Calculator Worked Example
Use the example data button to load a known sample, then calculate and review the statistic, p-value or estimate, and interpretation.
| Input | Example value |
|---|---|
| Groups | Control: 8,9,6,7
A: 10,12,9,11
B: 14,13,15,16 |
| Control group name | Control |
| Alpha | 0.05 |
Verified Worked Result
The packaged automated fixture produces the following checked values from the example inputs. Display rounding can differ from the full-precision browser result.
| Result | Verified value |
|---|---|
| Control Group | Control |
| Group Summaries 0 Name | Control |
| Group Summaries 0 N | 4 |
| Group Summaries 0 Mean | 7.5 |
| Group Summaries 0 Variance | 1.6666666666667 |
| Mse | 1.6666666666667 |
| Df Error | 9 |
| Correlation Matrix 0 0 | 1 |
| Correlation Matrix 0 1 | 0.5 |
| Simulation Seed | 24681357 |
| Simulation Draws | 60000 |
| Monte Carlo Standard Error At 0 05 | 0.00088975652100261 |
How to Use This Workspace
- Confirm that the method matches the quantity, hypothesis, model or planning question you need to solve.
- Enter values with compatible units and the requested sample, group, matrix, count, date or option format.
- Use Example Data to inspect a valid input layout, or enter your own values and run the calculation.
- Review the result table, formula, substitutions, warnings and interpretation rather than relying only on the headline number.
- Copy, download or print the result when you need a reusable analysis record.
Understanding and Reporting the Result
Review Method, Control Group, Group Summaries, Mse, Df Error, Correlation Matrix, Simulation Seed, Simulation Draws, Monte Carlo Standard Error At 0 05, and Critical Value. Use the displayed assumptions, warnings, and interpretation before reporting the result. In the Dunnett Test Calculator result workspace, interpret method, control_group, group_summaries, mse, df_error, correlation_matrix together with the method assumptions, warning messages, confidence information, effect magnitude, and diagnostic plots shown for the selected variables.
Do not treat different multiple-comparison procedures as synonyms; each controls error or loss differently and may require a significant omnibus test.
Keep the entered values, units, selected options and any warning shown beside the result. For a hypothesis test, report the statistic, degrees of freedom where applicable, p-value, alpha level, effect size and decision. For an estimate or conversion, report the formula convention and final unit.
How to Report the Result
When reporting results from the Dunnett Test Statistical Calculator, identify the design and software, state the valid sample size and exclusions, then report Method, Control Group, Group Summaries, Mse, Df Error, Correlation Matrix, Simulation Seed, Simulation Draws. Include the selected alpha level, tail, coding, and assumption decisions when they apply. A reproducible Dunnett Test Calculator report should identify the mapped variables, valid observations, exclusions or missing-data handling, selected options, principal outputs, uncertainty, diagnostics, and the practical conclusion supported by the analysis.
Accuracy and Limitations
The calculator keeps full browser precision during calculation and rounds only for display. Accuracy still depends on correct inputs and on whether the displayed model represents the real problem. Educational calculators cannot replace required professional review, current official rules, field measurements, laboratory methods or specialist statistical software where those are necessary.
Frequently Asked Questions
What does the Dunnett Test Calculator calculate?
Compare treatments against a control. Use Dunnett Test Calculator to validate groups, control group name, alpha and report method, control_group, group_summaries, mse, df_error, correlation_matrix with method-specific calculations, diagnostics, and interpretation.
Which formula does the Dunnett Test Calculator use?
Dunnett test compares each treatment with the named control using pooled MSE. Two-sided family p-values and the simultaneous critical value come from the correlated multivariate t distribution, evaluated with a fixed reproducible simulation.
When should I use the Dunnett Test Statistical Calculator?
Use the Dunnett Test Statistical Calculator when your research question, variable types, and sampling or experimental design require dunnett test. Do not select it only because the data produce a convenient p-value or familiar output.
What inputs does the Dunnett Test Statistical Calculator require?
Upload or paste data, review the cleaning report, then select the outcome, group, subject, condition, or matrix roles required by Dunnett Test Calculator.
What does the Dunnett Test Statistical Calculator report?
Review Method, Control Group, Group Summaries, Mse, Df Error, Correlation Matrix, Simulation Seed, Simulation Draws, Monte Carlo Standard Error At 0 05, and Critical Value. Use the displayed assumptions, warnings, and interpretation before reporting the result.
Can the Dunnett Test Statistical Calculator analyze Excel or CSV data?
Yes. The file is cleaned locally in the browser, then method-valid variable dropdowns place the selected data into this exact calculator.