Morse Code Audio Decoder

Audio and Timing · Visual Morse laboratory

Morse Code Audio Decoder

Decode Morse from an uploaded audio file or live microphone by extracting the amplitude envelope, estimating tone/no-tone durations and allowing threshold correction before translation.

Independent calculatorBrowser-local processingLive visual output

Primary intentmorse code audio decoder

MethodAudio and Timing

ExampleA clean recording of ... --- ... is segmented into…

PrivacyRuns in your browser

Quick answer

Use the visual calculator

Decode Morse from an uploaded audio file or live microphone by extracting the amplitude envelope, estimating tone/no-tone durations and allowing threshold correction before translation.

Worked example: A clean recording of ... --- ... is segmented into short-short-short, long-long-long, short-short-short and decoded as SOS.

Calculator at a glance

InputsAudio file or microphone, Amplitude threshold, Minimum pulse duration

OutputsWaveform and envelope, Estimated dot length and WPM, Decoded text and raw Morse

VisualAudio Decoder

Morse Code Audio Decoder

Adjust the method-specific controls and inspect both the calculated result and the synchronized visual.

Enter settings

These controls belong specifically to this calculator.

Live visual

The diagram, signal, chart or interactive surface updates with the calculation.

Calculated result

Copy the exact output or print the completed result.

Enter values and run this calculator.

How this visual Morse calculator works

The page separates input, transformation and verification so the result remains understandable.

1. Enter

Audio file or microphone is supplied using the calculator-specific controls.

2. Normalize

The browser validates symbols, timing values, separators, files or device permissions required by this method.

3. Calculate

The decoder converts audio to a mono amplitude envelope, distinguishes tone from silence using the selected threshold, removes pulses shorter than the minimum duration, estimates the dot unit from pulse clusters and classifies gaps.

4. Visualize

The audio decoder display reveals the signal structure instead of presenting only a text answer.

5. Verify

Compare the mapping, timing units, decoded characters, measured pulses or design dimensions shown in the result.

Method, timing and worked example

The calculation follows the rule appropriate to this individual tool.

Method used

Worked example

A clean recording of ... --- ... is segmented into short-short-short, long-long-long, short-short-short and decoded as SOS.

Change the inputs to reproduce or extend the example

Standard timing reference: At ordinary International Morse timing, a dot lasts one unit, a dash three units, the gap inside a character one unit, the gap between characters three units and the gap between words seven units. The WPM tools use the PARIS timing convention, while Farnsworth mode lengthens spacing without slowing individual dots and dashes.

Inputs, outputs and result interpretation

Review what the tool accepts, what it returns and where caution is required.

Inputs used

Audio file or microphone

Amplitude threshold

Minimum pulse duration

Outputs produced

Waveform and envelope

Estimated dot length and WPM

Decoded text and raw Morse

What this calculator does well

File and microphone analysis

Adjustable threshold

Pulse and gap table

Important limitations

Background noise, automatic gain control and music can prevent reliable decoding. The result should be verified against the waveform.

For camera, microphone, audio and image analysis, signal quality and browser support affect the result. Treat uncertain output as a candidate interpretation and verify it against the source.

Morse Code Audio Decoder questions

Answers to common questions about the calculation and visual result.

What does the Morse Code Audio Decoder calculate?

Decode Morse from an uploaded audio file or live microphone by extracting the amplitude envelope, estimating tone/no-tone durations and allowing threshold correction before translation.

Which Morse standard does this tool use?

The calculator uses International Morse code for supported letters, digits, punctuation and common procedural signals. Timing follows the standard one-unit dot, three-unit dash, one-unit element gap, three-unit letter gap and seven-unit word gap unless a dedicated timing control changes spacing.

How should I read the visual result?

Dots appear as short circular or short-duration marks, while dashes appear as longer bars or pulses. The live visual is synchronized with the text result so each transformation can be inspected instead of accepted as an unexplained answer.

Does this calculator upload my message or recording?

Calculations run in the browser. Camera, microphone, audio and image tools process the selected stream or file locally in the page; the plugin does not send those inputs to a calculation server.

What can affect accuracy?

Background noise, automatic gain control and music can prevent reliable decoding. The result should be verified against the waveform.

Can I use the result for practice or design?

Yes. Copy and print controls are included, and tools that create reusable audio, vector, image or stencil output provide a download control. Verify any safety-critical or permanent design before relying on it.

Use the visual calculator

Calculator at a glance

Morse Code Audio Decoder

Enter settings

Live visual

Calculated result

How this visual Morse calculator works

1. Enter

2. Normalize

3. Calculate

4. Visualize

5. Verify

Method, timing and worked example

Worked example

Inputs, outputs and result interpretation

Inputs used

Outputs produced

What this calculator does well

Important limitations

Morse Code Audio Decoder questions

Related visual Morse calculators

Need help understanding your data?