Is this Pool Evaporation Calculator U.S.-focused?

Yes. U.S. units, terminology and rules are the primary defaults where location matters.

Pool Evaporation Calculator: Formula, Units & Results

United States calculator

Estimate pool water loss and refill cost

Use surface area, evaporation rate, cover reduction, days and local water price to estimate U.S. gallons lost.

pool water-loss column

Project inputs

Pool length ftAverage pool width ftEvaporation rate in/dayDaysCover/use reduction %Water price per 1,000 gal

Pool Evaporation Calculator results

How this Pool Evaporation Calculator works

Surface area times evaporation depth gives volume; cubic feet are converted to U.S. gallons.

Important: Wind, humidity, temperature, splash-out and leaks can dominate actual loss.

What assumptions should I verify?

The Pool Evaporation Calculator uses U.S.-first defaults where conventions affect Pool length ft, Average pool width ft, and Evaporation rate in/day; its visible selectors identify alternate measurements explicitly. The reported Pool surface area, Modeled water depth lost, and Water lost follows the selected units and the same canonical equation Area = Length × Width.

Is information sent anywhere?

The Pool Evaporation Calculator evaluates Area = Length × Width locally in the browser. Values entered for Pool length ft, Average pool width ft, and Evaporation rate in/day are used to produce Pool surface area, Modeled water depth lost, and Water lost inside the `pool-evaporation` module and are not transmitted to a remote solver or stored by this calculator.

Pool Evaporation Calculator: formula-based step-by-step solution

This Pool Evaporation Calculator worked derivation uses the published default state. Its live formula panel replaces these values whenever an input, unit, mode, date, material, or scenario changes.

Governing formula or algorithm — exact production relationships:

Area = Length × Width
Inches = Rate × Days × (1-Cover ÷ 100)
Cubic Feet = area × inches ÷ 12
Gallons = cubicFeet × 7.48051948
Cost = gallons ÷ 1000 × Price
Daily = gallons ÷ Days

1. Governing formulas and numeric substitution

Formula 1: Area = Length × Width
Default-value substitution: Area = (30) × (15)
Intermediate evaluation: 450
Formula 2: Inches = Rate × Days × (1-Cover ÷ 100)
Default-value substitution: Inches = (0.25) × (7) × (1-(30) ÷ 100)
Intermediate evaluation: 1.225
Formula 3: Cubic Feet = area × inches ÷ 12
Default-value substitution: Cubic Feet = (450) × (1.225) ÷ 12
Intermediate evaluation: 45.9375
Formula 4: Gallons = cubicFeet × 7.48051948
Default-value substitution: Gallons = cubicFeet × 7.48051948 | current data: Pool length ft=30 ft; Average pool width ft=15 ft; Evaporation rate in/day=0.25 in/day; Days=7; Cover/use reduction %=30 %; Water price per 1,000 gal=8 per 1,000 gal
Formula 5: Cost = gallons ÷ 1000 × Price
Default-value substitution: Cost = gallons ÷ 1000 × (8)
Formula 6: Daily = gallons ÷ Days
Default-value substitution: Daily = gallons ÷ (7)

2. Variables and measurement units used

Pool length ft = 30 ft
Average pool width ft = 15 ft
Evaporation rate in/day = 0.25 in/day
Days = 7
Cover/use reduction % = 30 %
Water price per 1,000 gal = 8 per 1,000 gal

3. Pool Evaporation Calculator final evaluation: this calculator’s production engine evaluates the substituted relationship with unrounded internal precision; its subject-specific result cards, table, and visual report the rounded final answer and verification quantities.

Formula-based calculator guide

Pool Evaporation Calculator: formula, steps, units and verification

pool evaporation calculator is designed for a transparent calculation rather than a black-box answer. Pool Evaporation Calculator: use surface area, evaporation rate, cover reduction, days and local water price to estimate U.S. gallons lost. U.S.-first.

How to use the pool evaporation calculator in 5 steps

Choose the required mode. Select the calculation path that matches the quantity you know and the result you need.
Enter source values. Use measured, documented or assignment values rather than rounded estimates whenever possible.
Confirm every unit. The pool evaporation calculator converts supported units before formula substitution, so each selector must describe the entered number.
Run the calculation. Review the displayed formula, normalized values and numeric substitution before accepting the final result.
Verify the answer. Reproduce the substitution manually and check whether the output is reasonable for the stated assumptions.

Pool Evaporation Calculator formula and unit checks

The pool evaporation calculator keeps source inputs, canonical calculation units and displayed output units separate. This prevents a correct formula from producing a wrong answer because feet were treated as meters, percentages as decimals, or time values as the wrong interval.

For an independent check, copy the formula shown by the calculator, substitute the unrounded canonical values, preserve full precision through intermediate operations and round only the final result. The verified answer should match both the displayed number and its measurement unit.

How to interpret the pool evaporation calculator result

A result is useful only when its assumptions match the real problem. Compare the answer with expected ranges, inspect any warning or boundary message, and test a nearby input to confirm that the output changes in the direction predicted by the governing relationship.

The pool evaporation calculator provides an educational and planning result. For regulated, medical, structural, financial, laboratory or safety-critical decisions, verify the inputs and method against the applicable professional requirements before acting.

Pool Chemical Dose CalculatorMuriatic Acid Pool Calculator: calculate liquid chlorine, muriatic-acid planning doses, alkalinity increaser, pool salt and calcium-hypochlorite shock.
Pool Calcium Hardness CalculatorPool Calcium Hardness Calculator: for calcium chloride product. Enter the variables, select units, review numeric substitution, reverse solving.
Pool Enclosure Height CalculatorPool Enclosure Height Calculator: enter wall height, clear span, roof pitch and a user-entered local maximum to check a proposed screen-enclosure profile.
Pool Heater Size and Heating Time CalculatorPool Heating Calculator: estimate pool-heater BTU/h, heat-up time and energy cost from pool volume, temperature rise, heat loss and fuel efficiency.
Pool Pump Flow and Turnover CalculatorPool Pump Flow Rate Calculator: calculate required GPM, turnover time, estimated head and pump operating cost from pool volume, plumbing and schedule. Get.
Pool Table Room Size CalculatorPool Table Room Size Calculator: find the minimum room dimensions for common U.S. pool-table sizes and cue lengths, including short-cue clearance checks.

Pool Evaporation Calculator quick verification checklist

Before saving or reporting a result from the pool evaporation calculator, confirm the input source, unit selections, formula mode, intermediate substitution, final unit and rounding rule. These checks make the calculation reproducible and easier to audit.

Browse the complete published calculator sitemap or return to the Salar Cafe home page.